Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kondo, Yasuhiro; Takei, Hayanori; Yee-Rendon, B.; Tamura, Jun
Purazuma, Kaku Yugo Gakkai-Shi, 98(5), p.222 - 226, 2022/05
A superconducting accelerating cavity is indispensable to realize a driver linac that meets the requirements of ADS. The low-energy section of the accelerators, which is normal conducting one, was redesigned to reflect the recent progress in the development of superconducting accelerator cavities. In addition, we are developing a prototype cavity for the spoke-type cavity that has not been developed well. This section reports on the latest research and development of ADS linacs at the Japan Atomic Energy Agency.
Yoshimoto, Masahiro; Nakanoya, Takamitsu; Yamazaki, Yoshio; Saha, P. K.; Kinsho, Michikazu; Yamamoto, Shunya*; Okazaki, Hiroyuki*; Taguchi, Tomitsugu*; Yamada, Naoto*; Yamagata, Ryohei*
Proceedings of 18th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.850 - 854, 2021/10
no abstracts in English
J-PARC Center
JAEA-Evaluation 2019-003, 52 Pages, 2019/06
JAEA-Evaluation-2019-003.pdf:6.61MB
Evaluation Committee of Research Activities for J-PARC for interim assessment of Japan Proton Accelerator Research Complex evaluated the management and research activities of J-PARC center on the explanatory documents and oral presentations during the period from April 2015 to December 2018. This report summarizes the results of the assessment by the Committee with the Committee report attached.
Hotchi, Hideaki; Watanabe, Yasuhiro; Harada, Hiroyuki; Okabe, Kota; Saha, P. K.; Shobuda, Yoshihiro; Tamura, Fumihiko; Yoshimoto, Masahiro
Proceedings of 9th International Particle Accelerator Conference (IPAC '18) (Internet), p.1041 - 1044, 2018/06
Yamamoto, Kazami; Kamiya, Junichiro; Saha, P. K.; Takayanagi, Tomohiro; Yoshimoto, Masahiro; Hotchi, Hideaki; Harada, Hiroyuki; Takeda, Osamu*; Miki, Nobuharu*
Proceedings of 8th International Particle Accelerator Conference (IPAC '17) (Internet), p.579 - 581, 2017/05
The 3-GeV Rapid Cycling Synchrotron of Japan Proton Accelerator Research Complex aims to deliver 1-MW proton beam to the neutron target and Main Ring synchrotron. Present beam power of the Rapid Cycling Synchrotron is up to 500-kW and the higher radiation doses were concentrated in the injection area. These activations were caused by the interaction between the foil and the beam. To reduce the worker dose near the injection point, we have studied a new design of the injection scheme to secure enough space for radiation shielding and bellows. In the new system, two of four injection pulse bump magnets are replaced and we are able to ensure the additional space around the injection foil chamber. So far, new injection system seems not impossible. However, preliminary study result indicated that temperature of the duct and shielding metals would be slightly higher. The eddy current due to the shift bump magnet field generates heat. Thus we have to study details of above effect.
Nakashima, Hiroshi; Nakane, Yoshihiro; Masukawa, Fumihiro; Matsuda, Norihiro; Oguri, Tomomi*; Nakano, Hideo*; Sasamoto, Nobuo*; Shibata, Tokushi*; Suzuki, Takenori*; Miura, Taichi*; et al.
Radiation Protection Dosimetry, 115(1-4), p.564 - 568, 2005/12
Times Cited Count：8 Percentile：49.02(Environmental Sciences)The High Intensity Proton Accelerator Project, named as J-PARC, is in progress, aiming at studies on the latest basic science and the advancing nuclear technology. In the project, the high-energy proton accelerator complex of the world highest intensity is under construction. In order to establish a reasonable shielding design, both simplified and detailed design methods were used in the shielding design of J-PARC. This paper reviews the present status of the radiation safety design study for J-PARC.
Miyamoto, Yukihiro; Sakamaki, Tsuyoshi*; Maekawa, Osamu*; Nakashima, Hiroshi
JAERI-Tech 2004-054, 72 Pages, 2004/08
A standard is provided for the radiation monitor based on LAN (Local Area Network) and PLC (Programmable Logic Controller) technology at the introduction to the Japan Proton Accelerator Research Complex (J-PARC). The monitor consists of radiation measurement equipments and the central monitoring panel. The formers are installed in the radiation field, and the latter is installed in the control room and composed of PLC, which are connected with LAN. Extension of the existing standard and the conformity to the international standard were thought as important in providing the standard. The standard is expected to improve the compatibility, maintenancability and productivity of the components.
Nishizawa, Daiji*; Kinsho, Michikazu; Kanazawa, Kenichiro; Ogiwara, Norio; Saito, Yoshio*; Kubo, Tomio*; Sato, Yoshihiro*
Shinku, 47(4), p.339 - 343, 2004/05
no abstracts in English
Sakamoto, Shinichi; Meigo, Shinichiro; Konno, Chikara; Kai, Tetsuya; Kasugai, Yoshimi; Harada, Masahide; Fujimori, Hiroshi*; Kaneko, Naokatsu*; Muto, Suguru*; Ono, Takehiro*; et al.
JAERI-Tech 2004-020, 332 Pages, 2004/03
JAERI-Tech-2004-020.pdf:17.93MB
One of the experimental facilities in Japan Proton Accelerator Research Complex (J-PARC) is the Materials and Life Science Experimental Facility (MLF), where high-intensity neutron beams and muon beams are used as powerful probes for materials science, life science and related engineering. The neutrons and muons are generated with high-intensity proton beam from 3-GeV rapid cycling synchrotron (RCS). The high-intensity proton beam has to be effectively transported, and a neutron production target and a muon production target have to be also properly irradiated. The principal design of the 3-GeV proton beam transport facility (3NBT) is systematized.
Materials & Life Science Experimental Facility Construction Team
JAERI-Tech 2004-001, 1171 Pages, 2004/03
JAERI-Tech-2004-001-Part1.pdf:80.84MBJAERI-Tech-2004-001-Part2.pdf:43.14MB
This report summarizes conceptual design study up to March, 2003, relevant to the Materials & Life Science Experimental Facility construction which is one of the major user facilities to be constructed under the J-PARC project of High Intensity Proton Accelerator. The first chapter corresponds to the design manual, and the followings stand for the technical parts giving the design principle and detailed results for the studies. As the project is evolving day by day, some of studies have been advanced since the moment of this summary in one hand, and some of parts are close to final stage of design. Including those, more comprehensive and updated version of the technical designs are to be reported accordingly.
Nishizawa, Daiji*; Kinsho, Michikazu; Kanazawa, Kenichiro; Ogiwara, Norio; Saito, Yoshio*; Kubo, Tomio*; Sato, Yoshihiro*
Shinku, 47(4), p.339 - 343, 2004/02
Large aperture cylindrical beam ducts consisting of alumina ceramics will be used for the first time in the 3GeV-synchrotron of High Intensity Proton Accelerator Facility. It is necessary to evaluate roundness and straightness of ceramic ducts because we have to compensate contact area of the connected beam duct large as well as we have to compensate large enough beam aperture. We developed an apparatus of measuring roundness and straightness, and we completed data analysis method as well as measuring method. Then we are measuring and evaluating roundness and straightness of ceramic beam ducts. Now, we have newly made an ellipse ceramic duct for the 3GeV-synchrotron BM. This duct has ellipse cross-sections to satisfy with larger aperture that the beam dynamics requires. In this conference, we are going to present taken data and findings regarding form accuracy including roundness and straightness of the ellipse ceramic duct.
Yamazaki, Yoshishige
Proceedings of 9th European Particle Accelerator Conference (EPAC 2004), p.1351 - 1353, 2004/00
The J-PARC (Japan Proton Accelerator Research Complex) is under construction in JAERI Tokai site. The beam commissioning will start there by the end of 2006. Prior to this, the front end of the linac was beam-commissioned in 2003 at KEK. The negative hydrogen beam with a peak current of 30 mA was accelerated up to 20 MeV by the first tank of the three DTL's following the 3-MeV RFQ linac. The 324-MHz DTL contains the electro quadrupole magnets with water-cooling channels specially fabricated by means of electroforming and wire-cutting technologies. The construction status of the J-PARC accelerator is also presented.
Takada, Hiroshi; Maekawa, Fujio; Honmura, Shiro*; Yoshida, Katsuhiko*; Teraoku, Takuji*; Meigo, Shinichiro; Sakai, Akio*; Kasugai, Yoshimi; Kanechika, Shuji*; Otake, Hidenori*; et al.
Proceedings of ICANS-XVI, Volume 3, p.1115 - 1125, 2003/07
no abstracts in English
Yamazaki, Yoshishige
Proceedings of 2003 Particle Accelerator Conference (PAC 2003) (CD-ROM), p.576 - 580, 2003/00
The JAERI-KEK Joint Project for the High Intensity Proton Accelerator, now referred to as the J-PARC Project (Japan Proton Accelerator Research Complex), comprises a 400-MeV linac, a 3-GeV, 25-Hz Rapid-Cycling Synchrotron (RCS), and a 50-GeV Main Synchrotron (MR). In contrast to the SNS or the ESS, the J-PARC makes use of the RCS in order to produce MW-class pulsed spallation neutrons rather than a combination of the full-energy linac and the compressor ring.
Miyamoto, Yukihiro; Ikeno, Koichi; Akiyama, Shigenori*; Harada, Yasunori
JAERI-Tech 2002-086, 43 Pages, 2002/11
Description is given for the characteristic radiation environment for the High Intensity Proton Accelerator Facility and the design concept of the radiation control system of it. The facility is a large scale accelerator complex consisting of high energy proton accelerators carrying the highest beam intensity in the world and the related experimental facilities and therefore provides various issues relevant to the radiation environment. The present report describes the specifications for the radiation control system for the facility, determined in consideration of these characteristics.
Sasamoto, Nobuo; Nakashima, Hiroshi; Hirayama, Hideo*; Shibata, Tokushi*
Journal of Nuclear Science and Technology, 39(Suppl.2), p.1264 - 1267, 2002/08
no abstracts in English
Ikeda, Yujiro
Journal of Nuclear Science and Technology, 39(Suppl.2), p.13 - 18, 2002/08
no abstracts in English
Oyama, Yukio
Radioisotopes, 51(5), p.219 - 227, 2002/05
no abstracts in English
Maekawa, Fujio; Teshigawara, Makoto; Takada, Hiroshi; Furusaka, Michihiro*; Watanabe, Noboru
JAERI-Tech 2002-035, 68 Pages, 2002/03
JAERI-Tech-2002-035.pdf:4.76MB
no abstracts in English
Kai, Tetsuya; Maekawa, Fujio; Kosako, Kazuaki*; Kasugai, Yoshimi; Takada, Hiroshi; Ikeda, Yujiro
JAERI-Data/Code 2001-016, 82 Pages, 2001/03
JAERI-Data-Code-2001-016.pdf:4.22MB
no abstracts in English
